Cheek Retractor KCR01 KCR02 KCR03 KCR04 KCR05 KCR06 KCR07 KCR08 KMP01 KMP02

Dry Field System Tubing

The product is composed of seven parts:retractor,connecting rod,tongue blocking,connecting arm,silicone tube,,position block,and tee tube.

.Before operation,dentists need to put the retarctors on both sides of patient's lips to maintain the mouth opening so that patient will not feel too tired.

Meanwhile the tongue guard can effectively restrict the activities of the tongue.

.The mouth bottom is just below the suction ara,which can maximize the absorption of the saliva and prevent moisture.This product can create a relatively dry environment for dentists.

Cheek Retractor

Our product is composed of C-shaped connecting rod and retractors on both sides with good intensity and ductility.Different from traditional cheek retractor,our product is made by special technique.The forsted surface with half-clear white color brings good texture and hand-touching.also it is anti-skid.When oral treatment,put cheek retractor on both corner of patient's mouth.and open the mouth adequately to reduce patient's fatigue.Cheek retrator is a assistant tool for doctor's treatment.

Mouth Prop&Tongue Guard

Easily avoiding patients fatigue by using mouth prop,make patients enjoy a relaxing treatment;tongue guard block tongue moving so that no injury would happen during the whole treatment.

KCR01

KCR02

KCR03

KCR04

KCR05

KMP01

Impression Trays KIT01 KIT02 KIT06 KIT07 KIT08 KTT01 KBT KDT01 KDT02 KDT03 KDT05 KDT06

1.Confirm the tray is clean before using.

2.Soak the tray in hot water (within the range of 70-80°C)for 10 to 20 seconds .

3.Take out the tray, adjust the size and the angle with hands according to the oral and dental status of the patient. When the patient has asymmetric teeth or some deformed teeth, the sizes of individual portions shall be adjusted especially.

4.Put the adjust tray into the mouth of the patient and confirm whether he is comfortable or not. If the patient is not comfortable, please repeat the step 2 and 3,and readjustment is carried out accordingly till the patient feel the tray comfortable in his mouth.

5.Inject impression material or silicon rubbers into the final adjusted tray, put the tray into the mouth of patient, and then get model.

KIT01

Disposable impression trays, unique designed rigid, distortion-free construction. Perforation are designed to enhance consistent flow and retention. Smooth edges for comfort. Number-coded for easy identification of sizes.

KIT02

Autoclavable, it can be heated to 121°C, repeated use after sterilization. Uniquely design with sturdy and durable plastic. Ergonomic design, smooth surface, smooth surface make patients comfortable.

KIT07

Simple structure without the front and back connection, convenience to use, no foreign body sensation, uniform silicon when take the mold. Can get the occlusal record in one time. Also because of our inner tray design, make it more easy to get the mold which the occlusal is too tigh.

KIT06

Consist of base, frame, lagging strip, tray and hanging bar. It is used to place impression tray,  eliminate adhesion or extrusion, retain model intact and precise. Simple impression tray stand with 1 tray and 1 lagging strip, hanging on the wall as well.

KIT08

Transform Impression Trays
1. Confirm the tray is clean before using.
2. Soak the tray in hot water (within the range of 70- -80° C) for 10 to 20 seconds .
3.Take out the tray, adjust the size and the angle with hands acording to the oral and dental status of the patient. When the patient has asymmetric teeth or some deformed teeth,the size of individual portions shall be adjusted especially.
4. .Put the adjusted tray into the mouth of the patient and confirm whether he is comfortable or not. If the patient is not comfortable, please repeat the step 2 and
3, and readjustment is carried out accordingly till the patient feel the tray comfortable in his mouth.
5. lnject impression materials or silion rubbers into the final adjusted tray, put the tray into the mouth of patient, and then get model .

KTT01

Excellent pyroplasticity material trays. For soft and elastic, it makes patients comfortable.

KBT

It is used for counter impression and bite registration. Impression trays are rigid plastic frame, with ergonomic designed handle, makes patients comfortable. Five sizes are suitable for all people.

KIT01

KIT02

KTT01

KIT07

KIT08

KBT

KDT01