Resin Heater

CL62 Resin Heater

1、Production introduction:
1.1、HEATER is suitable for heating resin, Branscan agar,
sodium hypochlorite. Adopting precise circuit control and imported
heating tube, it can set any integer temperature within 40-70°C .
according to the heating object.
1.2、 Some materials and recommended temperature

Technical parameters:
Input voltage : 100V-240V AC 50/60Hz 0.8A
Output voltage : 12V DC 2A
Power : 24W
Temperature setting : 40+1°C、50+1°C、 70+1C

 

Amalgamator

AM13 Amalgamator

Controlled by a microprocessor to ensure a precise, controlled, consistent mix. With working speed ≧4200rpm can adjust working time from 4S to 60S. It is suitable for all the capsule and glass ionomer sold in the market. For safe operation, the motor will stop, when the mask is open. It can satisfy different customers’ requirements.

Feature:
1.  Time setting with memory function.
2.  Security Guard design, motor will stop when the mask is open.
3.  Noiseless, Stable operation, Electrical safety standard met.
4.  Automatic alarm to remind, Easy maintenance.

Technical Data:
*Power voltage: AC 220V, 50HZ or AC 110V, 60HZ
*Motor power: 40W
*Blending speed: ≧4200rpm
*Range of timing: 4S~60S
*Noise level: less than 65db (A)
*Gross weight: 2.6kg
*Size: 285*245*225m

Names of parts and Operation Detail:

Operation:

1) Turn on the switch and press the black switch at rear device, the screen is light.

2) Set the blending time. Press the setting button shortly, the time increases 2 seconds; press it for a long time, the time increases to needed time quickly.(the highest time is 60 seconds, then it recycles to 4 seconds )and the timer is memorable.(eg. 004 stands for 4 seconds and 060 stands for 60 seconds).

3) Open the mask, put the capsule into the clip and then close the mask. (To ensure safety, the device will beep on error instead of working while the mask is open.) This setup has applied for national patent.

4) Press start/stop, the device runs, meanwhile, the screen shows the time which is decreasing accordingly until the time is over with beeping and the device stop working automatically.

5) Turn off the device and detach the capsule, the blending is ok.

Suggested time of blending:

Brand	To take GK amalgam capsule for an example (Ag43% Sn32% Cu25%)
Specifications of amalgam capsule	GK alloy powders 200mg	GK alloy powders 400mg	GK alloy powders 600mg	GK alloy powders 800mg
Recommended time	12S∽16S	12S∽16S	12S∽18S	16S∽20S

 

1:high quality ensures a tough
2:It have no Zinc, no Gamma II and minimize the risk of fracturing the restoration

This series includes traditional silver alloy with high silver content(about 69%) and its capsules,as well as high-copper silver alloy containing about 43% silver and its capsules.Adopting the latest pressing diaphragm structure,the capsules of this kind are convenient for pressing and regulating,uneasy to cause powder inlay,and thus applicable to various types of amalgamators,enabling you to obtain perfect amalgam.The amalgam obtained has high brightness,good flexility and micro-expansion after curing,free from micro-leakage,and therefore,has extremely strong plasticity.Amalgam alloy has high strength and is the most common material for direct and permanent posterior-teeth restoration or core restoration.