UP601P Porcelain Furnace For Press

Efficient,Convenient,Fast,Low cost,Compatible with all casting porcelain blocks.

Built in numbers of programme and can be used as a ceramic furnace.

Servo motor driven die casting, constant pressure, no external air source, high success rate.

OPERATION：
The velocity of temperature increasing: 200℃/min max.(392°F /minute)
The max temperature: : 1200℃ max (2283°F)
The time which can be kept at the max temperature: 2 H Vacuum level:1-101%

ELECTRIC POWER：
Operation range：100-120V 50/60HZ 230V 50/60HZ
Electric current：14.5ampere@110V 7.0ampere@230V
Power：max 1500w
 
TYPICAL SPECIFICATION：
WXDXH :width 27cm Depth 36cm Height 70cm
Usable measure (firing chamber):：9cm（3.5”）
Net weight：23Kg
Weight include the package:26.5Kg

AMBIENT CONDITIONS
. Indoor use
.Ambient temperature: 2°C to 40°C
. Relative humidity 80% at 31°C
.Maximum altitude: 1500 m (Special Model:3500m)
.Rated voltage fluctuations must not exceed plus/minus 10% of the rated voltage

Vacuum PUMP:

  W*D*H :27*36*70
  Weight include the package :40Kg
 

Sharpening Stones

Specification:
1,It can heat four type wax simultaneity and keep them in liquid status
2,There is temperature-fixed adjustment,can set the temperature

needed+/-1°C;
3, Good at heat conduction and insulation
4,Easy to operate and use
5,Melting the wax quickly and keep them in liquid status
6,Equipped digital CPU circuit and set/keep temperature needed;
7,Easy to compare pre-set temperature and current temperature
8,LED display heating automatically , LED will shut off when arriving

temperature set
9,Easily recognize the specially situation because of accurate

temperature sensor