SS31 Sealing Machine         

Features:

1.Best sealing scenario
2.the best sealing temperature is available when the voltage changes
3.corrosion proof cover, insulated safety performance
4.imported stainless steel cover leads to easy clean
5.smooth cut
6.two cutting devices

Instructions:

Please read the manual carefully before operation
Sealing machine should be handled with care in carrying.
Please don’t splash the sealing machine in case of electricity leakage
Please don’t knob to 4 in case of sealing quality
Please don’t roll the sealing machine.

AC power :220V/50Hz
Power Rating:500W    
Fuse:3TA
Indentation Width:10mm
Packing size:460X380X390mm
Weight:9.1KG

SS33 SEAL 120 Sealing Machine

Product Details

Voltage: AC 230V, 50-60Hz
Power: 100W
Indentation width: 12mm
Max sealing width: 300mm
Sealing speed: 7.5m/Minute
Sealing temperature: 200±100 Degree
Package size: 545X440X240mm
N/G weight: 4.8kgs/7kgs
 
Heating
Only 3 min. heating to reach 200±100 Degree
Keep constant temperature
 
Operation mode:
When the green light stops flashing, get ready to work
The heandles can be in 2 directions operation
Keep pressing the handle>3seconds--Sealing completed
Keep pressing the handle>6seconds--It will make alarm
Keep pressing the handle>30seconds--Automatic poer-off protection

Note: Purified water is not distilled water!
Sterilization must adopt distilled water as operation medium.Even purified water has various minerals and can produce furring scale after evaporation at high temperature ,which after a period of time,can to leaking of steam due to improper closure.It can also lead to the narrow pipes sensor,to the malfunction of temperature sensor and to other failures.Once the furring scale enters hand-piece and other instrumment which are hollow inside or has apertures,it will clog the narrow pipes and axis,lowering the turning speed of hand-piece and other instrument which are hollow inside or has apertures,it will clog the narrow pipes
and axis,lowering the turning speed of hand-piece,thus reducing its life span.
Therefore,using distilled water is necessary. 

1.Please read the manual carefully before operation.
2.The distiller should work in dry and well-ventilated place.
3.Please use 220V outlet which is prohibited to work for a variety of appliances to avoid overload.
4.Please don’t use broken power cord
5.Don’t use distiller during water injection, cleaning or inoperation
6.Distiller can’t be immersed in water
7.Keep the distiller far from children in case of scald
8.Do not remove the top cover until 10 minutes after finishing working in case of scald
9.Do not use steel wool (brush) or other hard object to scrape stainless steel chamber so as not to damage surface and more easily stained with dirt